Fume hood price
Fume hood price in India
Nobody sells a fume hood the way a shop sells a chair. What it costs depends on what you plan to do inside it.
- Ducted and ductless
- ASHRAE 110 containment test
- Supply, install, commission, validate
- Is there a list price
- No. Every fume hood is quoted per requirement, against your chemistry and your room.
- What sets the number
- Five decisions, from the exhaust route through to the validation scope.
- How to get one
- Four inputs, one email, and a figure priced for the lab you actually have.
Fume hood pricing, in one line
Two hoods of the same width can land far apart on price. The difference is the chemistry each one has to resist, and the work it takes to fit it into your lab. So a fume hood is quoted per requirement. There is no single list price.
The fastest route to a real number is a short conversation about your chemistry and your room. Have it with the team that will size the exhaust and the make-up air around the hood, not with a catalogue desk. That team has engineered the ventilation for 2,000+ controlled environments since 2004, across every industry that needs controlled air. The figure you get back reflects the installed reality, not a box on a shelf.
What drives the price of a fume hood
Two quotes for what looks like the same hood can land far apart. The money is rarely in the box itself. It sits in what gets specified around the box: the material it is built from, the air it has to move, and the proof that it works. These are the factors that move the number, in roughly the order they move it.
| Cost factor | What sits behind it |
|---|---|
| Type | Basic ducted, ductless carbon-filtered, acid/PP, or perchloric wash-down. Different price classes, and ductless filters add ongoing cost. |
| Size | Bench widths around 1.2-1.8 m, plus walk-in formats. Larger hoods cost more and move more air. |
| Construction and materials | Epoxy-coated steel, polypropylene for acids, phenolic or ceramic worktops, laminated safety-glass sashes. Corrosion-rated builds cost more. |
| Ducting, blower and make-up air | The exhaust fan, the ductwork and the lab's make-up air. Often a bigger line than the hood itself, and the item most price lists ignore. |
| Monitoring and controls | Airflow monitor and alarm, VAV control, sensors. |
| Installation, commissioning and validation | ASHRAE 110 containment testing and face-velocity verification. Where the exhaust has to meet CPCB discharge limits, a scrubber on the stack. |
| Filters (ductless) | Replacement carbon and HEPA filters, recurring over the working life of the hood. |
FIG. 01Ordered by how much each factor typically moves a quotation. An ordering, not a cost breakdown, and not to scale.
The line most
people miss
The line most people miss is make-up air. Air that a hood throws out of the lab has to be replaced, and the replacement has to be conditioned. It is a real cost. It belongs in the quote on day one, not in a surprise later.
The types themselves are laid out on the fume hood overview .
Because of all this, a credible quote starts from your chemistry, your bench and your building. It never starts from a catalogue number.
The five decisions behind a fume hood quote
A price does not exist until five decisions have been made. Walk the tree from the root: each branch changes what is being quoted, and every end point names what we would need from you before a number can be real.
Each step shows how many of the four routes still give that same answer.
- 01
General organic bench
- 01 Exhaust route3 routesDucted to stack
- 02 Carcass and liner2 routesEpoxy steel, phenolic liner
- 03 Width and fittingsSplits here1200 mm bench, 2 service points
- 04 Monitoring and alarmAirflow monitor at the sash
- 05 Validation scopeFace velocity at handover
What we would needYour solvent list, the bench length, and the height of the ceiling void the duct has to cross.
- 02
High throughput bench
- 01 Exhaust route3 routesDucted to stack
- 02 Carcass and liner2 routesEpoxy steel, phenolic liner
- 03 Width and fittingsSplits here1800 mm bench, 4 service points
- 04 Monitoring and alarmVAV control and BMS alarm link
- 05 Validation scopeASHRAE 110, as installed
What we would needYour chemical list, the full bench run, and whether a building management system is already on site.
- 03
Acid digestion
- 01 Exhaust route3 routesDucted to stack
- 02 Carcass and linerSplits herePolypropylene, acid duty
- 03 Width and fittings1500 mm bench, 3 service points
- 04 Monitoring and alarmMonitor and audible alarm
- 05 Validation scopeASHRAE 110 and a witnessed test
What we would needYour acid list and concentrations, the bench length, and the route the exhaust stack can take.
- 04
Filtered recirculation
- 01 Exhaust routeSplits hereDuctless, carbon filtered
- 02 Carcass and linerEpoxy steel, ceramic worktop
- 03 Width and fittings900 mm bench, 1 service point
- 04 Monitoring and alarmCarbon filter saturation alarm
- 05 Validation scopeFilter suitability report
What we would needYour chemistry and the quantity handled per session, so carbon filter life can be sized honestly.
FIG. 02Four routes through the same five decisions. Routes that have answered identically so far share a node, so a quotation stops being the same quotation at the step where its route splits away. Every route ends at an ask, never at a figure. Configurations shown are illustrative, not a catalogue. The lit path walks one route at a time, root to leaf.
What each leaf asks for
The terminal leaf of every route is an ask, not a figure. Send us the ask and the number can be real.
- 01
General organic bench
Your solvent list, the bench length, and the height of the ceiling void the duct has to cross.
- 02
High throughput bench
Your chemical list, the full bench run, and whether a building management system is already on site.
- 03
Acid digestion
Your acid list and concentrations, the bench length, and the route the exhaust stack can take.
- 04
Filtered recirculation
Your chemistry and the quantity handled per session, so carbon filter life can be sized honestly.
- 01
Exhaust route
Ducted to a stack, or ductless with carbon filtration. This one answer sets the ductwork, the blower and the make-up air load.
- 02
Carcass and liner
What the chemistry demands: epoxy-coated steel, polypropylene for acid duty, phenolic or ceramic worktops.
- 03
Width and fittings
Bench width or a walk-in format, and how many gas, water and power services come through the liner.
- 04
Monitoring and alarm
An airflow monitor at the sash, an audible alarm, VAV control, or a link into the building management system.
- 05
Validation scope
Face velocity verified at handover, ASHRAE 110 containment testing as installed, or a witnessed test to your own protocol.
Why are fume hoods “expensive”?
Ask why a hood costs what it does, and the honest answer is that you are not buying furniture. You are buying the air system that makes the furniture safe. An empty cabinet does nothing on its own. A cabinet that pulls the right volume of air away from the person at the sash is what keeps that person safe.
Most of the cost is the ventilation engineering around the box. That means moving and safely discharging large volumes of air, then replacing it with conditioned make-up air. It also means resisting aggressive chemistry and proving containment to a standard.
A hood priced only as a piece of furniture usually has that engineering missing. That is where under-specified hoods fail.
So a cheap quote can turn out to be the expensive one.
The cost left out of it does not disappear. It shows up later, as a hood that does not protect the person standing at it. Paying for the airflow design is paying for the hood actually protecting the operator.
- Air removed
- Conditioned make-up air
FIG. 03The air system a fume hood quotation actually buys: in at the sash, up the duct, out above the roof, and every cubic metre removed replaced by conditioned make-up air.
Fume hood price in India: how to get an accurate quote
You do not need a finished design to get a useful number. A fume hood price in India comes together from four inputs, and most labs can answer all four in one email.
- Your chemistry
- The type of hood, and the material it is built from
- Your bench size
- The hood width, or a walk-in format
- Whether ducting is available
- Ducted or ductless, and the make-up air that comes with it
- Whether you need monitoring and validation
- Airflow monitoring and controls, plus containment testing
FIG. 04Four answers in one email are enough to price a hood, its ducting, its make-up air and its validation together.
Share those four and the quote reflects the real installed cost, with make-up air and commissioning included. It is not a headline box price that grows once the work starts.
Fabtech Cleanrooms supplies and integrates fume hoods as part of the lab ventilation design, and quotes each one per requirement. Send us your chemistry and your bench size. What comes back is a real installed number, with hood, ducting, make-up air and validation costed together.
Talk to the engineers who will size and spec it
Contact and quote request Turnkey cleanroom and lab solutions Validation and qualification
- Controlled environments engineered
- 2,000+
- Sector that needs controlled air
- Any
- Decisions that set the quote
- 5
- Inputs we need from you
- 4
Engineering the ventilation for controlled environments since 2004. Every fume hood is supplied, installed, commissioned and validated to a scope agreed in writing, and quoted per requirement.
Fume hood price, common questions
There is no single list price. The cost follows the type, the size, the construction, the ducting and make-up air, plus any monitoring and validation. Give a supplier a short spec of your chemistry and your bench, and you get a number priced for your own lab.
Marketplaces list box prices. For an installed figure that holds, ask a supplier who will also engineer the exhaust, the make-up air and the validation. Share your chemistry, bench size and ducting situation. Fabtech supplies and integrates fume hoods within the lab ventilation design.
Most of the cost is the ventilation engineering, not the visible cabinet. The hood has to move and discharge large air volumes, take in conditioned make-up air, resist aggressive chemistry and prove containment to a standard. Under-priced hoods usually have that engineering missing.
Type and size come first. Construction material is next, because acid-resistant polypropylene costs more. Then comes the ducting and make-up air a ducted hood needs, often the biggest single factor. Ductless hoods swap that for a recurring filter cost.
Up front it usually avoids the ducting, the blower and the make-up-air cost. Against that, it adds recurring replacement of carbon and HEPA filters, and it suits only compatible chemistry. So cheaper depends on your chemistry and your timeframe.
No. The installed cost depends on your chemistry, your room and your validation needs, so every hood is quoted per requirement. That keeps the figure accurate instead of a headline that changes later. Share your basic spec and we can price it for your lab.
Send us four things
Your chemistry, your bench size, whether ducting is available, and whether you need monitoring and validation. Our engineers respond with a scoped quotation, not a brochure.